Find Trade Colleges
Sawing Machine Setters, Operators, and Tenders, Wood in Georgia
Thinking about a career as a Sawing Machine Setters, Operators, and Tenders, Wood in Georgia? Here’s what the data says. Set up, operate, or tend wood sawing machines. May operate computer numerically controlled (CNC) equipment. Includes lead sawyers. Workers who primarily program or operate CNC equipment are classified in “Computer Numerically Controlled Tool Operators and Programmers” (51-9160).
What do Sawing Machine Setters, Operators, and Tenders, Wood Make in Georgia?
For sawing machine setters, operators, and tenders, wood working in Georgia, wages run about $38,370 per year (or roughly $18.45/hour).Annual wages span from $28,280 at the 10th percentile to $49,420 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $28,280 | $13.59 |
| 25th percentile | $32,210 | $15.49 |
| Median (50th) | $38,370 | $18.45 |
| 75th percentile | $45,020 | $21.65 |
| 90th percentile | $49,420 | $23.76 |
The job concentration index in Georgia relative to the national average — is 1.60, suggesting that sawing machine setters, operators, and tenders, wood are more concentrated here than the national average.
National Wage Comparison
Nationally, sawing machine setters, operators, and tenders, wood earn a median of $67,957 per year ($32.67/hour), lower than the Georgia median.
Employment Outlook
National employment for 98,686 sawing machine setters, operators, and tenders, wood in the U.S.. In Georgia alone, around 2,180 people work in this role. That’s higher than the typical state, which employs around 840 sawing machine setters, operators, and tenders, wood.
Top Georgia Metros for Sawing Machine Setters, Operators, and Tenders, Wood
These are the Georgia metros with the most sawing machine setters, operators, and tenders, wood in Georgia.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Atlanta-Sandy Springs-Roswell, GA | 640 | $40,300 |
| Columbus, GA-AL | 150 | $35,970 |
| Augusta-Richmond County, GA-SC | 80 | $38,700 |
| Savannah, GA | 50 | $39,690 |
Top States for Sawing Machine Setters, Operators, and Tenders, Wood Employment
These states have the highest employment of sawing machine setters, operators, and tenders, wood work.
| State | Number Employed |
|---|---|
| California | 2,500 |
| North Carolina | 2,290 |
| Georgia | 2,180 |
| Alabama | 2,160 |
| Pennsylvania | 2,060 |
| Ohio | 2,030 |
| Oregon | 2,000 |
| Texas | 1,970 |
| Indiana | 1,800 |
| Virginia | 1,730 |
| Arkansas | 1,680 |
| Michigan | 1,590 |
| Wisconsin | 1,590 |
| Washington | 1,580 |
| Mississippi | 1,430 |
| Missouri | 1,390 |
| Kentucky | 1,300 |
| Tennessee | 1,130 |
| New York | 1,120 |
| Florida | 1,090 |
Highest-Paying States for Sawing Machine Setters, Operators, and Tenders, Wood
These states pay the most for sawing machine setters, operators, and tenders, wood.
| State | Annual Median Salary |
|---|---|
| Oregon | $49,660 |
| Montana | $48,950 |
| Minnesota | $48,930 |
| Washington | $48,830 |
| Idaho | $48,630 |
| Iowa | $47,740 |
| Illinois | $47,730 |
| Massachusetts | $47,430 |
| Colorado | $46,550 |
| California | $45,540 |
Skills
Top sawing machine setters, operators, and tenders, wood skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Key abilities for sawing machine setters, operators, and tenders, wood, rated on an importance scale of 0 to 5:
Daily Tasks
Sawing Machine Setters, Operators, and Tenders, Wood typically:
- Inspect and measure workpieces to mark for cuts and to verify the accuracy of cuts, using rulers, squares, or caliper rules.
- Adjust saw blades, using wrenches and rulers, or by turning handwheels or pressing pedals, levers, or panel buttons.
- Mount and bolt sawing blades or attachments to machine shafts.
- Set up, operate, or tend saws or machines that cut or trim wood to specified dimensions, such as circular saws, band saws, multiple-blade sawing machines, scroll saws, ripsaws, or crozer machines.
- Inspect stock for imperfections or to estimate grades or qualities of stock or workpieces.
- Monitor sawing machines, adjusting speed and tension and clearing jams to ensure proper operation.
- Sharpen blades, or replace defective or worn blades or bands, using hand tools.
- Guide workpieces against saws, saw over workpieces by hand, or operate automatic feeding devices to guide cuts.
- Clear machine jams, using hand tools.
- Lubricate or clean machines, using wrenches, grease guns, or solvents.
- Adjust bolts, clamps, stops, guides, or table angles or heights, using hand tools.
- Examine logs or lumber to plan the best cuts.
Work Activities
- Controlling Machines and Processes
- Handling and Moving Objects
- Performing General Physical Activities
- Inspecting Equipment, Structures, or Materials
- Identifying Objects, Actions, and Events
- Communicating with Supervisors, Peers, or Subordinates
- Getting Information
- Repairing and Maintaining Mechanical Equipment
- Operating Vehicles, Mechanized Devices, or Equipment
- Training and Teaching Others
- Monitoring Processes, Materials, or Surroundings
- Estimating the Quantifiable Characteristics of Products, Events, or Information
Tools & Technology
Technologies frequently used: Hot technologies: Adobe Acrobat
What Major Will Prepare You For This Career?
Several college majors map to this occupation:
Related Careers
Other careers like sawing machine setters, operators, and tenders, wood include:
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
- Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Automatic Bandsaw Tender, Automatic Edger, Automatic Log Cut-Off Sawyer, Backup Sawyer, Band Saw Operator, Band Saw Runner, Band Sawyer, Band Scroll Saw Operator, Bandmill Operator, Bandsaw Operator, Bead Cutter, Beading Sawyer, Bill Cutter, Billet Cutter, Block Bolter Mule Operator.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-7041.00
TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© TradeCollege.org – All Rights Reserved.