Find Trade Colleges
Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic in Indiana
Considering working as a Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic in Indiana? Here’s what the data says. Set up, operate, or tend more than one type of cutting or forming machine tool or robot.
What do Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic Make in Indiana?
The multiple machine tool setters, operators, and tenders, metal and plastic working in Indiana, wages run about $43,810 per year (or roughly $21.06/hour).Pay can range from $33,440 at the 10th percentile to $59,040 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $33,440 | $16.08 |
| 25th percentile | $38,090 | $18.31 |
| Median (50th) | $43,810 | $21.06 |
| 75th percentile | $49,590 | $23.84 |
| 90th percentile | $59,040 | $28.38 |
The job concentration index in Indiana nationwide is 2.06, suggesting that multiple machine tool setters, operators, and tenders, metal and plastic are more concentrated here than the national average.
National Wage Comparison
Nationally, multiple machine tool setters, operators, and tenders, metal and plastic earn a median of $55,961 per year ($26.90/hour), lower than the Indiana median.
Employment Outlook
There are roughly 86,165 multiple machine tool setters, operators, and tenders, metal and plastic in the U.S.. In Indiana alone, approximately 5,520 people work in this role. That puts the state above the typical state, which employs around 1,560 multiple machine tool setters, operators, and tenders, metal and plastic.
Top Indiana Metros for Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic
The metro areas below employ the most multiple machine tool setters, operators, and tenders, metal and plastic in Indiana.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Indianapolis-Carmel-Greenwood, IN | 1,080 | $38,820 |
| Fort Wayne, IN | 340 | $40,510 |
| Columbus, IN | 250 | $42,650 |
| South Bend-Mishawaka, IN-MI | 190 | $43,860 |
| Terre Haute, IN | 190 | $49,130 |
| Elkhart-Goshen, IN | 160 | $47,170 |
| Evansville, IN | 90 | $46,600 |
| Lafayette-West Lafayette, IN | 90 | $39,030 |
| Muncie, IN | 50 | $37,020 |
Top States for Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic Employment
These states have the highest employment of multiple machine tool setters, operators, and tenders, metal and plastic work.
| State | Number Employed |
|---|---|
| Ohio | 13,670 |
| Texas | 12,820 |
| Michigan | 8,820 |
| Pennsylvania | 8,300 |
| Kentucky | 5,950 |
| Indiana | 5,520 |
| Missouri | 5,400 |
| Illinois | 5,180 |
| Florida | 4,450 |
| Iowa | 4,350 |
| Wisconsin | 4,280 |
| New York | 4,150 |
| South Carolina | 4,000 |
| New Jersey | 3,390 |
| Georgia | 3,390 |
| North Carolina | 3,200 |
| California | 3,150 |
| Oklahoma | 2,460 |
| Connecticut | 2,370 |
| Arkansas | 2,210 |
Highest-Paying States for Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Where multiple machine tool setters, operators, and tenders, metal and plastic earn the most: multiple machine tool setters, operators, and tenders, metal and plastic.
| State | Annual Median Salary |
|---|---|
| West Virginia | $73,690 |
| North Dakota | $62,400 |
| Missouri | $58,210 |
| Maryland | $57,800 |
| Washington | $57,080 |
| South Dakota | $50,870 |
| Colorado | $50,800 |
| New York | $49,600 |
| Idaho | $49,590 |
| Kentucky | $49,570 |
Skills
Top multiple machine tool setters, operators, and tenders, metal and plastic skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Important knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Key abilities for multiple machine tool setters, operators, and tenders, metal and plastic, rated on an importance scale of 0 to 5:
Daily Tasks
Common tasks include:
- Inspect workpieces for defects, and measure workpieces to determine accuracy of machine operation, using rules, templates, or other measuring instruments.
- Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
- Read blueprints or job orders to determine product specifications and tooling instructions and to plan operational sequences.
- Select, install, and adjust alignment of drills, cutters, dies, guides, and holding devices, using templates, measuring instruments, and hand tools.
- Observe machine operation to detect workpiece defects or machine malfunctions, adjusting machines as necessary.
- Set up and operate machines, such as lathes, cutters, shears, borers, millers, grinders, presses, drills, or auxiliary machines, to make metallic and plastic workpieces.
- Change worn machine accessories, such as cutting tools or brushes, using hand tools.
- Set machine stops or guides to specified lengths as indicated by scales, rules, or templates.
- Select the proper coolants and lubricants and start their flow.
- Remove burrs, sharp edges, rust, or scale from workpieces, using files, hand grinders, wire brushes, or power tools.
- Perform minor machine maintenance, such as oiling or cleaning machines, dies, or workpieces, or adding coolant to machine reservoirs.
- Make minor electrical and mechanical repairs and adjustments to machines and notify supervisors when major service is required.
Work Activities
- Getting Information
- Identifying Objects, Actions, and Events
- Controlling Machines and Processes
- Inspecting Equipment, Structures, or Materials
- Evaluating Information to Determine Compliance with Standards
- Making Decisions and Solving Problems
- Monitoring Processes, Materials, or Surroundings
- Processing Information
- Handling and Moving Objects
- Estimating the Quantifiable Characteristics of Products, Events, or Information
- Analyzing Data or Information
- Judging the Qualities of Objects, Services, or People
Tools & Technology
Common tools and software used in this occupation include: Hot technologies: Autodesk AutoCAD
What Major Will Prepare You For This Career?
Related college programs include:
Related Careers
Careers similar to multiple machine tool setters, operators, and tenders, metal and plastic include:
- Industrial Machinery Mechanics
- Maintenance Workers, Machinery
- Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Automatic Wheel-Line Operator, Ballistics Laboratory Gunsmith, CNC Machine Setter (Computer Numerically Controlled Machine Setter), Cell Technician, Centrifugal Control Switch Machine Operator, Clock Machine Setter, Combination Machine Tool Operator, Combination Machine Tool Setter, Electrode Turner and Finisher, Fabrication Set-Up Person, Four Slide Machine Setter, Four-Slide Machine Setter, Gear Cutting Machine Set-Up Operator, Gear Cutting Machine Setup Operator, Gear Hobber Set-Up Operator.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-4081.00
TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© TradeCollege.org – All Rights Reserved.