Find Trade Colleges
Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Texas
Want to work as an Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Texas? Here’s what the data says. Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
What do Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Make in Texas?
For aircraft structure, surfaces, rigging, and systems assemblers working in Texas, wages run about $81,130 per year (or roughly $39.01/hour).Earnings range from $46,540 at the 10th percentile to $97,370 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $46,540 | $22.38 |
| 25th percentile | $58,010 | $27.89 |
| Median (50th) | $81,130 | $39.01 |
| 75th percentile | $83,870 | $40.32 |
| 90th percentile | $97,370 | $46.81 |
Location quotient — how concentrated this career is in Texas relative to the national average — is 1.10.
National Wage Comparison
Nationally, aircraft structure, surfaces, rigging, and systems assemblers earn a median of $48,162 per year ($23.16/hour), higher than the Texas median.
Employment Outlook
Nationally, total employment in this occupation is 782,560 aircraft structure, surfaces, rigging, and systems assemblers in the U.S.. In Texas alone, around 3,260 people work in this role. That puts the state above the typical state, which employs around 560 aircraft structure, surfaces, rigging, and systems assemblers.
Top Texas Metros for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
These are the Texas metros with the most aircraft structure, surfaces, rigging, and systems assemblers in Texas.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Dallas-Fort Worth-Arlington, TX | 2,450 | $83,870 |
| Wichita Falls, TX | 100 | n/a |
| San Antonio-New Braunfels, TX | 90 | $60,030 |
Top States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Employment
These states have the highest employment of aircraft structure, surfaces, rigging, and systems assemblers work.
| State | Number Employed |
|---|---|
| Kansas | 10,470 |
| Washington | 4,760 |
| Texas | 3,260 |
| Georgia | 3,030 |
| California | 1,720 |
| Florida | 1,330 |
| Pennsylvania | 1,140 |
| Alabama | 780 |
| North Carolina | 660 |
| Arizona | 640 |
| Arkansas | 580 |
| Oregon | 560 |
| Missouri | 380 |
| Oklahoma | 280 |
| New York | 260 |
| Connecticut | 240 |
| Utah | 240 |
| Michigan | 210 |
| Colorado | 170 |
| Idaho | 130 |
Highest-Paying States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
These states pay the most for aircraft structure, surfaces, rigging, and systems assemblers.
| State | Annual Median Salary |
|---|---|
| Washington | $93,550 |
| Connecticut | $82,280 |
| Texas | $81,130 |
| Pennsylvania | $78,570 |
| Colorado | $68,230 |
| Arizona | $66,930 |
| Georgia | $65,580 |
| Missouri | $64,360 |
| Florida | $62,770 |
| Alabama | $62,010 |
Skills
Key aircraft structure, surfaces, rigging, and systems assemblers skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for aircraft structure, surfaces, rigging, and systems assemblers, rated on an importance scale of 0 to 5:
Daily Tasks
Common tasks include:
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
Work Activities
- Controlling Machines and Processes
- Monitoring Processes, Materials, or Surroundings
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Documenting/Recording Information
- Handling and Moving Objects
- Updating and Using Relevant Knowledge
- Organizing, Planning, and Prioritizing Work
- Thinking Creatively
- Communicating with Supervisors, Peers, or Subordinates
- Making Decisions and Solving Problems
- Establishing and Maintaining Interpersonal Relationships
Tools & Technology
Common tools and software used in this occupation include: Hot technologies: Microsoft Excel
What Major Will Prepare You For This Career?
Several college majors map to this occupation:
Related Careers
Careers similar to aircraft structure, surfaces, rigging, and systems assemblers include:
- Electro-Mechanical and Mechatronics Technologists and Technicians
- Sheet Metal Workers
- Avionics Technicians
- Electric Motor, Power Tool, and Related Repairers
- Aircraft Mechanics and Service Technicians
- Control and Valve Installers and Repairers, Except Mechanical Door
Also Known As
A&P Technician (Airframe and Powerplant Technician), Aerospace Assembler, Aircraft De-Icer Installer, Aircraft Fuselage Framer, Aircraft Layout Worker, Aircraft Line Assembler, Aircraft Part Assembler, Aircraft Parts Assembler, Aircraft Powerplant Repairer, Aircraft Riveter, Aircraft Sheet Metal Mechanic, Aircraft Structure Assembler, Aircraft Structures and Surfaces Assembler, Armament Aircraft Mechanic, Assembler.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-2011.00
TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© TradeCollege.org – All Rights Reserved.