Find Trade Colleges

Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Georgia

Thinking about a career as an Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Georgia? Below are the key facts. Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.

$65,580 Median Annual Wage (Georgia)

$48,162 National Median Annual Wage

3,030 Georgia Employment

Some Preparation Needed Typical Preparation

What do Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Make in Georgia?

The aircraft structure, surfaces, rigging, and systems assemblers working in Georgia, the median annual wage is $65,580 per year (or roughly $31.53/hour).Pay can range from $41,620 at the 10th percentile to $86,710 at the 90th percentile.

Wage Statistic	Annual	Hourly
10th percentile	$41,620	$20.01
25th percentile	$51,330	$24.68
Median (50th)	$65,580	$31.53
75th percentile	$81,870	$39.36
90th percentile	$86,710	$41.69

Salary ranges for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers in Georgia

Location quotient — how concentrated this career is in Georgia nationwide is 2.93, indicating that aircraft structure, surfaces, rigging, and systems assemblers are more concentrated here than the national average.

National Wage Comparison

Nationally, aircraft structure, surfaces, rigging, and systems assemblers earn a median of $48,162 per year ($23.16/hour), exceeding the Georgia median.

Employment Outlook

National employment for 782,560 aircraft structure, surfaces, rigging, and systems assemblers in the U.S.. In Georgia alone, around 3,030 people work in this role. That’s more than the typical state, which employs around 560 aircraft structure, surfaces, rigging, and systems assemblers.

Forecasted number of jobs for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers

Top Georgia Metros for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers

The largest metro-area employers of aircraft structure, surfaces, rigging, and systems assemblers in Georgia.

Metro Area	Number Employed	Annual Median Salary
Savannah, GA	1,530	n/a

Top States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers Employment

View the states that employ the most aircraft structure, surfaces, rigging, and systems assemblers work.

State	Number Employed
Kansas	10,470
Washington	4,760
Texas	3,260
Georgia	3,030
California	1,720
Florida	1,330
Pennsylvania	1,140
Alabama	780
North Carolina	660
Arizona	640
Arkansas	580
Oregon	560
Missouri	380
Oklahoma	280
New York	260
Connecticut	240
Utah	240
Michigan	210
Colorado	170
Idaho	130

Highest-Paying States for Aircraft Structure, Surfaces, Rigging, and Systems Assemblers

Where aircraft structure, surfaces, rigging, and systems assemblers earn the most: aircraft structure, surfaces, rigging, and systems assemblers.

State	Annual Median Salary
Washington	$93,550
Connecticut	$82,280
Texas	$81,130
Pennsylvania	$78,570
Colorado	$68,230
Arizona	$66,930
Georgia	$65,580
Missouri	$64,360
Florida	$62,770
Alabama	$62,010

Skills

Key aircraft structure, surfaces, rigging, and systems assemblers skills, rated on an importance scale of 0 to 5:

Quality Control Analysis 3.4 / 5

Critical Thinking 3.1 / 5

Monitoring 3.1 / 5

Active Listening 3.1 / 5

Judgment and Decision Making 3.0 / 5

Time Management 3.0 / 5

Knowledge Areas

Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:

Mathematics 3.5 / 5

Education and Training 3.5 / 5

Mechanical 3.4 / 5

English Language 3.4 / 5

Production and Processing 3.4 / 5

Design 3.4 / 5

Abilities

Key abilities for aircraft structure, surfaces, rigging, and systems assemblers, rated on an importance scale of 0 to 5:

Problem Sensitivity 3.8 / 5

Near Vision 3.6 / 5

Finger Dexterity 3.5 / 5

Visualization 3.4 / 5

Manual Dexterity 3.4 / 5

Information Ordering 3.4 / 5

Daily Tasks

Day-to-day, aircraft structure, surfaces, rigging, and systems assemblers typically:

Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
Fabricate parts needed for assembly or installation, using shop machinery or equipment.
Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
Clean, oil, or coat system components, as necessary, before assembly or attachment.
Assemble prefabricated parts to form subassemblies.
Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
Join structural assemblies, such as wings, tails, or fuselage.

Work Activities

Controlling Machines and Processes
Monitoring Processes, Materials, or Surroundings
Getting Information
Inspecting Equipment, Structures, or Materials
Documenting/Recording Information
Handling and Moving Objects
Updating and Using Relevant Knowledge
Organizing, Planning, and Prioritizing Work
Thinking Creatively
Communicating with Supervisors, Peers, or Subordinates
Making Decisions and Solving Problems
Establishing and Maintaining Interpersonal Relationships

Tools & Technology

Common tools and software used in this occupation include: Hot technologies: Microsoft Excel

What Major Will Prepare You For This Career?

Programs that train for this career include:

Vehicle Maintenance & Repair

Other careers like aircraft structure, surfaces, rigging, and systems assemblers include:

Also Known As

A&P Technician (Airframe and Powerplant Technician), Aerospace Assembler, Aircraft De-Icer Installer, Aircraft Fuselage Framer, Aircraft Layout Worker, Aircraft Line Assembler, Aircraft Part Assembler, Aircraft Parts Assembler, Aircraft Powerplant Repairer, Aircraft Riveter, Aircraft Sheet Metal Mechanic, Aircraft Structure Assembler, Aircraft Structures and Surfaces Assembler, Armament Aircraft Mechanic, Assembler.

References

U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
O*NET Online — https://www.onetonline.org/
BLS Employment Projections — https://www.bls.gov/emp/
O*NET-SOC code: 51-2011.00

TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.