Find Trade Colleges
Sheet Metal Workers in Wisconsin
Thinking about a career as a Sheet Metal Workers in Wisconsin? Below are the key facts. Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.
What do Sheet Metal Workers Make in Wisconsin?
The sheet metal workers working in Wisconsin, wages run about $75,970 per year (or about $36.53/hour).Earnings range from $45,610 at the 10th percentile to $104,380 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $45,610 | $21.93 |
| 25th percentile | $51,290 | $24.66 |
| Median (50th) | $75,970 | $36.53 |
| 75th percentile | $96,390 | $46.34 |
| 90th percentile | $104,380 | $50.18 |
Location quotient — how concentrated this career is in Wisconsin relative to the national average — is 1.34, indicating that sheet metal workers are more concentrated here than the national average.
National Wage Comparison
Nationally, sheet metal workers earn a median of $62,339 per year ($29.97/hour), higher than the Wisconsin median.
Employment Outlook
Nationally, total employment in this occupation is 308,016 sheet metal workers in the U.S.. In Wisconsin alone, approximately 2,990 people work in this role. That’s more than the typical state, which employs around 1,610 sheet metal workers.
Top Wisconsin Metros for Sheet Metal Workers
These are the Wisconsin metros with the most sheet metal workers in Wisconsin.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Milwaukee-Waukesha, WI | 950 | $79,490 |
| Madison, WI | 430 | $83,150 |
| Appleton, WI | 360 | $78,100 |
| Green Bay, WI | 230 | $75,010 |
| Wausau, WI | 90 | $68,800 |
| La Crosse-Onalaska, WI-MN | 70 | $65,890 |
| Eau Claire, WI | 50 | $74,690 |
| Oshkosh-Neenah, WI | 50 | $59,880 |
| Sheboygan, WI | 50 | $77,130 |
Top States for Sheet Metal Workers Employment
View the states that employ the most sheet metal workers work.
| State | Number Employed |
|---|---|
| Texas | 10,270 |
| Florida | 9,470 |
| California | 9,180 |
| New York | 6,190 |
| Ohio | 5,350 |
| Michigan | 4,590 |
| Illinois | 4,240 |
| Washington | 3,870 |
| Virginia | 3,870 |
| Georgia | 3,850 |
| Missouri | 3,740 |
| Indiana | 3,570 |
| Wisconsin | 2,990 |
| Arizona | 2,990 |
| Oregon | 2,920 |
| North Carolina | 2,860 |
| Oklahoma | 2,690 |
| Pennsylvania | 2,340 |
| Maryland | 2,230 |
| Minnesota | 2,230 |
Highest-Paying States for Sheet Metal Workers
Where sheet metal workers earn the most: sheet metal workers.
| State | Annual Median Salary |
|---|---|
| New Jersey | $94,310 |
| Illinois | $93,570 |
| Washington | $93,230 |
| Hawaii | $91,540 |
| Alaska | $82,750 |
| California | $79,630 |
| Massachusetts | $79,260 |
| North Dakota | $78,910 |
| District of Columbia | $76,450 |
| Wisconsin | $75,970 |
Skills
The most important sheet metal workers skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Key knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Top abilities for sheet metal workers, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, sheet metal workers typically:
- Maintain equipment, making repairs or modifications when necessary.
- Fabricate ducts for high efficiency heating, ventilating, and air conditioning (HVAC) systems to maximize efficiency of systems.
- Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
- Transport prefabricated parts to construction sites for assembly and installation.
- Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, rain gutters, or downspouts in supportive frameworks.
- Hire, train, or supervise new employees or apprentices.
- Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, using calculators, scribes, dividers, squares, or rulers.
- Fabricate or alter parts at construction sites, using shears, hammers, punches, or drills.
- Determine project requirements, such as scope, assembly sequences, or required methods or materials, using blueprints, drawings, or written or verbal instructions.
- Maneuver completed roofing units into position for installation.
- Select gauges or types of sheet metal or nonmetallic material, according to product specifications.
- Shape metal material over anvils, blocks, or other forms, using hand tools.
Work Activities
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Monitoring Processes, Materials, or Surroundings
- Establishing and Maintaining Interpersonal Relationships
- Communicating with People Outside the Organization
- Identifying Objects, Actions, and Events
- Training and Teaching Others
- Operating Vehicles, Mechanized Devices, or Equipment
- Coaching and Developing Others
- Evaluating Information to Determine Compliance with Standards
- Communicating with Supervisors, Peers, or Subordinates
- Guiding, Directing, and Motivating Subordinates
Tools & Technology
Technologies frequently used: Hot technologies: Autodesk AutoCAD
What Major Will Prepare You For This Career?
Several college majors map to this occupation:
Related Careers
Related occupations to sheet metal workers include:
- Boilermakers
- Carpenters
- Drywall and Ceiling Tile Installers
- Insulation Workers, Floor, Ceiling, and Wall
- Insulation Workers, Mechanical
- Plumbers, Pipefitters, and Steamfitters
Also Known As
AC Sheet Metal Installer (Air Conditioning Sheet Metal Installer), Air Duct Mechanic, Aircraft Metalsmith, Aircraft Sheet Metal Mechanic, Angle Bender, Aviation Metalsmith, Beam Worker, Ceiling Installer, Chute Builder, Commercial Sheet Metal Service Installer, Coppersmith, Cornice Maker, Cowlman, Deburr Tech (Deburr Technician), Duct Installer.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 47-2211.00
TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© TradeCollege.org – All Rights Reserved.