Find Trade Colleges
Electrical and Electronics Drafters in Ohio
Thinking about a career as an Electrical and Electronics Drafters in Ohio? Below are the key facts. Prepare wiring diagrams, circuit board assembly diagrams, and layout drawings used for the manufacture, installation, or repair of electrical equipment.
What do Electrical and Electronics Drafters Make in Ohio?
For electrical and electronics drafters working in Ohio, the typical annual salary is $80,420 per year (or roughly $38.66/hour).Annual wages span from $52,750 at the 10th percentile to $99,150 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $52,750 | $25.36 |
| 25th percentile | $61,660 | $29.64 |
| Median (50th) | $80,420 | $38.66 |
| 75th percentile | $90,860 | $43.68 |
| 90th percentile | $99,150 | $47.67 |
The job concentration index in Ohio compared to the national average — is 1.22, suggesting that electrical and electronics drafters are more concentrated here than the national average.
National Wage Comparison
Nationally, electrical and electronics drafters earn a median of $109,781 per year ($52.78/hour), lower than the Ohio median.
Employment Outlook
National employment for 144,118 electrical and electronics drafters nationwide. In Ohio alone, approximately 870 people work in this role. That puts the state above the typical state, which employs around 340 electrical and electronics drafters.
Top Ohio Metros for Electrical and Electronics Drafters
The metro areas below employ the most electrical and electronics drafters in Ohio.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Columbus, OH | 210 | $92,710 |
| Akron, OH | 170 | $85,400 |
| Cincinnati, OH-KY-IN | 150 | $67,820 |
| Cleveland, OH | 130 | $63,700 |
| Dayton-Kettering-Beavercreek, OH | 40 | $78,720 |
Top States for Electrical and Electronics Drafters Employment
The table below shows the states where the most electrical and electronics drafters work.
| State | Number Employed |
|---|---|
| California | 3,020 |
| Texas | 2,460 |
| New York | 930 |
| Ohio | 870 |
| Colorado | 800 |
| Florida | 770 |
| Pennsylvania | 620 |
| Massachusetts | 590 |
| Washington | 550 |
| Arizona | 530 |
| Connecticut | 490 |
| Michigan | 480 |
| Georgia | 470 |
| Minnesota | 460 |
| Maryland | 450 |
| Virginia | 410 |
| Wisconsin | 370 |
| North Carolina | 360 |
| Tennessee | 360 |
| New Mexico | 350 |
Highest-Paying States for Electrical and Electronics Drafters
Where electrical and electronics drafters earn the most: electrical and electronics drafters.
| State | Annual Median Salary |
|---|---|
| New Hampshire | $101,680 |
| Massachusetts | $90,820 |
| New Mexico | $88,790 |
| New York | $88,090 |
| Idaho | $81,730 |
| Missouri | $80,720 |
| Ohio | $80,420 |
| New Jersey | $79,420 |
| Tennessee | $77,590 |
| Iowa | $77,050 |
Skills
The most important electrical and electronics drafters skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Important knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
The abilities that matter most for electrical and electronics drafters, rated on an importance scale of 0 to 5:
Daily Tasks
Common tasks include:
- Draft detail and assembly drawings of design components, circuitry or printed circuit boards, using computer-assisted equipment or standard drafting techniques and devices.
- Draft working drawings, wiring diagrams, wiring connection specifications, or cross-sections of underground cables, as required for instructions to installation crew.
- Assemble documentation packages and produce drawing sets to be checked by an engineer or an architect.
- Review completed construction drawings and cost estimates for accuracy and conformity to standards and regulations.
- Consult with engineers to discuss or interpret design concepts, or determine requirements of detailed working drawings.
- Confer with engineering staff and other personnel to resolve problems.
- Measure factors that affect installation and arrangement of equipment, such as distances to be spanned by wire and cable.
- Design electrical systems, such as lighting systems.
- Draw master sketches to scale showing relation of proposed installations to existing facilities and exact specifications and dimensions.
- Review work orders or procedural manuals and confer with vendors or design staff to resolve problems or modify design.
- Locate files relating to specified design project in database library, load program into computer, and record completed job data.
- Examine electronic schematics and supporting documents to develop, compute, and verify specifications for drafting data, such as configuration of parts, dimensions, or tolerances.
Work Activities
- Working with Computers
- Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment
- Getting Information
- Communicating with Supervisors, Peers, or Subordinates
- Organizing, Planning, and Prioritizing Work
- Evaluating Information to Determine Compliance with Standards
- Updating and Using Relevant Knowledge
- Processing Information
- Making Decisions and Solving Problems
- Documenting/Recording Information
- Identifying Objects, Actions, and Events
- Establishing and Maintaining Interpersonal Relationships
Tools & Technology
Technologies frequently used: Hot technologies: Adobe Illustrator, Autodesk AutoCAD, Autodesk Revit In-demand technologies: Autodesk AutoCAD, Autodesk Navisworks
What Major Will Prepare You For This Career?
Programs that train for this career include:
Related Careers
Other careers like electrical and electronics drafters include:
- Computer Hardware Engineers
- Electrical Engineers
- Electronics Engineers, Except Computer
- Industrial Engineers
- Mechanical Engineers
- Mechatronics Engineers
Also Known As
Analog Design Engineer, Analog Integrated Circuits Design Engineer (Analog IC Design Engineer), AutoCAD Drafter, AutoCAD Technician, CAD Drafter (Computer-Aided Design Drafter), CAD Draftsman (Computer-Aided Design Draftsman), CADD Drafter (Computer-Aided Design and Drafting Drafter), Circuit Board Drafter, Circuit Designer, Computer-Aided Design Designer (CAD Designer), Computer-Aided Design Operator, Computer-Aided Design Technician (CAD Tech), Computer-Aided Drafting and Design Designer, Computer-Aided Drafting and Design Operator, Design Drafter.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 17-3012.00
TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© TradeCollege.org – All Rights Reserved.