---

Stone Cutters and Carvers, Manufacturing in Colorado

Considering working as a Stone Cutters and Carvers, Manufacturing in Colorado? Here’s what the data says. Mold, shape, form, cast, or carve products such as food products, figurines, tile, pipes, and candles consisting of clay, glass, plaster, concrete, stone, or combinations of materials.

What do Stone Cutters and Carvers, Manufacturing Make in Colorado?

The stone cutters and carvers, manufacturing working in Colorado, wages run about $45,480 per year (or roughly $21.87/hour).Pay can range from $37,650 at the 10th percentile to $62,620 at the 90th percentile.

Wage Statistic	Annual	Hourly
10th percentile	$37,650	$18.10
25th percentile	$39,220	$18.86
Median (50th)	$45,480	$21.87
75th percentile	$51,810	$24.91
90th percentile	$62,620	$30.10

The job concentration index in Colorado compared to the national average — is 0.95.

National Wage Comparison

Nationally, stone cutters and carvers, manufacturing earn a median of $39,562 per year ($19.02/hour), exceeding the Colorado median.

Employment Outlook

There are roughly 110,403 stone cutters and carvers, manufacturing in the U.S.. In Colorado alone, approximately 620 people work in this role. That matches the typical state median of 620.

Top Colorado Metros for Stone Cutters and Carvers, Manufacturing

The largest metro-area employers of stone cutters and carvers, manufacturing in Colorado.

Metro Area	Number Employed	Annual Median Salary
Denver-Aurora-Centennial, CO	340	$46,710
Greeley, CO	80	$45,290
Colorado Springs, CO	30	$48,900

Top States for Stone Cutters and Carvers, Manufacturing Employment

View the states that employ the most stone cutters and carvers, manufacturing work.

State	Number Employed
California	4,090
Michigan	1,980
Texas	1,950
Indiana	1,740
Pennsylvania	1,740
Ohio	1,730
Florida	1,680
New York	1,350
Illinois	1,160
Massachusetts	1,150
Alabama	1,140
Washington	1,100
Tennessee	930
Missouri	810
New Jersey	800
Kansas	800
Wisconsin	790
Minnesota	730
North Carolina	710
Georgia	680

Highest-Paying States for Stone Cutters and Carvers, Manufacturing

The highest-paying states for stone cutters and carvers, manufacturing.

State	Annual Median Salary
Hawaii	$74,780
Maryland	$51,470
New Hampshire	$50,690
New York	$50,470
Connecticut	$50,350
Massachusetts	$49,530
Montana	$49,350
Oregon	$49,290
New Jersey	$49,120
California	$48,390

Skills

Key stone cutters and carvers, manufacturing skills, rated on an importance scale of 0 to 5:

Knowledge Areas

Core knowledge areas for this occupation, rated on an importance scale of 0 to 5:

Abilities

The abilities that matter most for stone cutters and carvers, manufacturing, rated on an importance scale of 0 to 5:

Daily Tasks

Day-to-day, stone cutters and carvers, manufacturing typically:

• Verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments.
• Move fingers over surfaces of carvings to ensure smoothness of finish.
• Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.
• Lay out designs or dimensions from sketches or blueprints on stone surfaces, freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments.
• Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
• Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns.
• Select chisels, pneumatic or surfacing tools, or sandblasting nozzles, and determine sequence of use.
• Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques.
• Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans.
• Carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools.
• Guide nozzles over stone, following stencil outlines, or chip along marks to create designs or to work surfaces down to specified finishes.
• Smooth surfaces of carvings, using rubbing stones.

Work Activities

• Handling and Moving Objects
• Controlling Machines and Processes
• Operating Vehicles, Mechanized Devices, or Equipment
• Communicating with Supervisors, Peers, or Subordinates
• Performing General Physical Activities
• Making Decisions and Solving Problems
• Coordinating the Work and Activities of Others
• Getting Information
• Training and Teaching Others
• Organizing, Planning, and Prioritizing Work
• Inspecting Equipment, Structures, or Materials
• Thinking Creatively

Tools & Technology

Common tools and software used in this occupation include: Hot technologies: Microsoft Excel

Related Careers

Related occupations to stone cutters and carvers, manufacturing include:

• Brickmasons and Blockmasons
• Stonemasons
• Tile and Stone Setters
• Cement Masons and Concrete Finishers
• Terrazzo Workers and Finishers
• Rock Splitters, Quarry

Also Known As

Carver, Chiseler, Cutter, Dresser, Foot Caster, Granite Cutter, Granite Fabricator, Granite Slab Fabricator, Granite Worker, Hand Stonecutter, Internal Carver, Marble Carver, Marble Cutter, Monument Letterer, Polisher.

References

• U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
• O*NET Online — https://www.onetonline.org/
• BLS Employment Projections — https://www.bls.gov/emp/
• O*NET-SOC code: 51-9195.03