Find Trade Colleges
Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic in Mississippi
Want to work as a Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic in Mississippi? Below are the key facts. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, soaking pits, or vacuum equipment to temper, harden, anneal, or heat treat metal or plastic objects.
What do Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic Make in Mississippi?
For a heat treating equipment setters, operators, and tenders, metal and plastic working in Mississippi, the typical annual salary is $48,360 per year (or roughly $23.25/hour).Annual wages span from $30,140 at the 10th percentile to $71,760 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $30,140 | $14.49 |
| 25th percentile | $36,350 | $17.48 |
| Median (50th) | $48,360 | $23.25 |
| 75th percentile | $60,600 | $29.14 |
| 90th percentile | $71,760 | $34.50 |
The job concentration index in Mississippi relative to the national average — is 0.90.
National Wage Comparison
Nationally, heat treating equipment setters, operators, and tenders, metal and plastic earn a median of $51,258 per year ($24.64/hour), below the Mississippi median.
Employment Outlook
There are roughly 350,926 heat treating equipment setters, operators, and tenders, metal and plastic in the U.S.. In Mississippi alone, about 100 people work in this role. That trails the typical state, which employs around 190 heat treating equipment setters, operators, and tenders, metal and plastic.
Top Mississippi Metros for Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic
The metro areas below employ the most heat treating equipment setters, operators, and tenders, metal and plastic in Mississippi.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Jackson, MS | 40 | $48,480 |
Top States for Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic Employment
These states have the highest employment of heat treating equipment setters, operators, and tenders, metal and plastic work.
| State | Number Employed |
|---|---|
| Texas | 1,940 |
| Ohio | 1,580 |
| Pennsylvania | 1,410 |
| Michigan | 1,220 |
| Indiana | 990 |
| Illinois | 960 |
| California | 800 |
| Wisconsin | 510 |
| South Carolina | 460 |
| Georgia | 440 |
| North Carolina | 350 |
| Missouri | 320 |
| New York | 280 |
| Kentucky | 260 |
| Arkansas | 240 |
| Connecticut | 230 |
| New Jersey | 210 |
| Massachusetts | 190 |
| Florida | 180 |
| Tennessee | 180 |
Highest-Paying States for Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic
Where heat treating equipment setters, operators, and tenders, metal and plastic earn the most: heat treating equipment setters, operators, and tenders, metal and plastic.
| State | Annual Median Salary |
|---|---|
| Washington | $64,040 |
| Oregon | $62,200 |
| Colorado | $56,810 |
| Massachusetts | $55,340 |
| West Virginia | $55,100 |
| New York | $52,470 |
| Kentucky | $51,360 |
| Kansas | $50,890 |
| Arizona | $50,220 |
| New Hampshire | $50,170 |
Skills
Key heat treating equipment setters, operators, and tenders, metal and plastic skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Important knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
Key abilities for heat treating equipment setters, operators, and tenders, metal and plastic, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, heat treating equipment setters, operators, and tenders, metal and plastic typically:
- Read production schedules and work orders to determine processing sequences, furnace temperatures, and heat cycle requirements for objects to be heat-treated.
- Record times that parts are removed from furnaces to document that objects have attained specified temperatures for specified times.
- Adjust controls to maintain temperatures and heating times, using thermal instruments and charts, dials and gauges of furnaces, and color of stock in furnaces to make setting determinations.
- Start conveyors and open furnace doors to load stock, or signal crane operators to uncover soaking pits and lower ingots into them.
- Set up and operate or tend machines, such as furnaces, baths, flame-hardening machines, and electronic induction machines, that harden, anneal, and heat-treat metal.
- Remove parts from furnaces after specified times, and air dry or cool parts in water, oil brine, or other baths.
- Move controls to light gas burners and to adjust gas and water flow and flame temperature.
- Instruct new workers in machine operation.
- Determine flame temperatures, current frequencies, heating cycles, and induction heating coils needed, based on degree of hardness required and properties of stock to be treated.
- Determine types and temperatures of baths and quenching media needed to attain specified part hardness, toughness, and ductility, using heat-treating charts and knowledge of methods, equipment, and metals.
- Examine parts to ensure metal shades and colors conform to specifications, using knowledge of metal heat-treating.
- Set and adjust speeds of reels and conveyors for prescribed time cycles to pass parts through continuous furnaces.
Work Activities
- Handling and Moving Objects
- Controlling Machines and Processes
- Performing General Physical Activities
- Identifying Objects, Actions, and Events
- Operating Vehicles, Mechanized Devices, or Equipment
- Communicating with Supervisors, Peers, or Subordinates
- Getting Information
- Inspecting Equipment, Structures, or Materials
- Making Decisions and Solving Problems
- Documenting/Recording Information
- Judging the Qualities of Objects, Services, or People
- Monitoring Processes, Materials, or Surroundings
Tools & Technology
Technologies frequently used: Hot technologies: Microsoft Excel In-demand technologies: Microsoft Word
What Major Will Prepare You For This Career?
Related college programs include:
Related Careers
Other careers like heat treating equipment setters, operators, and tenders, metal and plastic include:
- Refractory Materials Repairers, Except Brickmasons
- Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
- Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Metal-Refining Furnace Operators and Tenders
Also Known As
Annealer, Annealing Furnace Operator, Annealing Furnace Tender, Annealing Oven Operator, Annealing Torch Operator, Bagger, Base-Draw Operator, Batch Heat Treat Operator, Batch Operator, Billet Heater, Billet Heater Operator, Box Annealer, Burner, Burner Machine Operator, Carbonizer.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-4191.00
TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© TradeCollege.org – All Rights Reserved.