Find Trade Colleges
Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders in Washington
Considering working as an Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders in Washington? Here’s what you need to know. Set up, operate, or tend machines, such as glass-forming machines, plodder machines, and tuber machines, to shape and form products such as glassware, food, rubber, soap, brick, tile, clay, wax, tobacco, or cosmetics. Excludes “Shoe Machine Operators and Tenders” (51-6042) and “Paper Goods Machine Setters, Operators, and Tenders” (51-9196).
What do Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders Make in Washington?
For a extruding, forming, pressing, and compacting machine setters, operators, and tenders working in Washington, wages run about $47,570 per year (or about $22.87/hour).Pay can range from $36,720 at the 10th percentile to $75,830 at the 90th percentile.
| Wage Statistic | Annual | Hourly |
|---|---|---|
| 10th percentile | $36,720 | $17.66 |
| 25th percentile | $42,300 | $20.34 |
| Median (50th) | $47,570 | $22.87 |
| 75th percentile | $59,130 | $28.43 |
| 90th percentile | $75,830 | $36.46 |
The job concentration index in Washington relative to the national average — is 0.49, suggesting fewer extruding, forming, pressing, and compacting machine setters, operators, and tenders per worker than the national average.
National Wage Comparison
Nationally, extruding, forming, pressing, and compacting machine setters, operators, and tenders earn a median of $64,701 per year ($31.11/hour), lower than the Washington median.
Employment Outlook
National employment for 319,449 extruding, forming, pressing, and compacting machine setters, operators, and tenders nationwide. In Washington alone, approximately 650 people work in this role. That’s below the typical state, which employs around 790 extruding, forming, pressing, and compacting machine setters, operators, and tenders.
Top Washington Metros for Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders
These are the Washington metros with the most extruding, forming, pressing, and compacting machine setters, operators, and tenders in Washington.
| Metro Area | Number Employed | Annual Median Salary |
|---|---|---|
| Seattle-Tacoma-Bellevue, WA | 230 | $49,280 |
| Spokane-Spokane Valley, WA | 50 | $43,490 |
Top States for Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders Employment
These states have the highest employment of extruding, forming, pressing, and compacting machine setters, operators, and tenders work.
| State | Number Employed |
|---|---|
| Ohio | 4,700 |
| California | 4,480 |
| Tennessee | 3,720 |
| New York | 3,420 |
| Texas | 3,170 |
| Indiana | 2,880 |
| North Carolina | 2,680 |
| Pennsylvania | 2,550 |
| Michigan | 2,360 |
| Illinois | 1,860 |
| New Jersey | 1,820 |
| Virginia | 1,680 |
| Missouri | 1,640 |
| Arkansas | 1,570 |
| South Carolina | 1,560 |
| Wisconsin | 1,510 |
| Kentucky | 1,470 |
| Alabama | 1,320 |
| Georgia | 1,300 |
| Massachusetts | 1,190 |
Highest-Paying States for Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders
Where extruding, forming, pressing, and compacting machine setters, operators, and tenders earn the most: extruding, forming, pressing, and compacting machine setters, operators, and tenders.
| State | Annual Median Salary |
|---|---|
| Montana | $58,060 |
| Maine | $52,960 |
| Colorado | $50,890 |
| Pennsylvania | $50,810 |
| Vermont | $50,700 |
| Minnesota | $50,480 |
| South Carolina | $49,730 |
| Idaho | $49,150 |
| West Virginia | $49,050 |
| Virginia | $48,980 |
Skills
Top extruding, forming, pressing, and compacting machine setters, operators, and tenders skills, rated on an importance scale of 0 to 5:
Knowledge Areas
Key knowledge areas for this occupation, rated on an importance scale of 0 to 5:
Abilities
The abilities that matter most for extruding, forming, pressing, and compacting machine setters, operators, and tenders, rated on an importance scale of 0 to 5:
Daily Tasks
Day-to-day, extruding, forming, pressing, and compacting machine setters, operators, and tenders typically:
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
Work Activities
- Controlling Machines and Processes
- Getting Information
- Monitoring Processes, Materials, or Surroundings
- Inspecting Equipment, Structures, or Materials
- Communicating with Supervisors, Peers, or Subordinates
- Identifying Objects, Actions, and Events
- Making Decisions and Solving Problems
- Documenting/Recording Information
- Processing Information
- Handling and Moving Objects
- Performing General Physical Activities
- Working with Computers
Tools & Technology
Technologies frequently used: Hot technologies: Microsoft Excel
Related Careers
Careers similar to extruding, forming, pressing, and compacting machine setters, operators, and tenders include:
- Industrial Machinery Mechanics
- Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
- Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Also Known As
Abrasive Wheel Molder, Air Bag Curer, Alfalfa Dehydrator Operator, Arch Cushion Press Operator, Artificial Log Machine Operator, Auger Press Operator, Automatic Lump Making Machine Tender, Bag Bailer, Bag Builder, Bailer, Bailing Machine Operator, Baler, Baler Operator, Baling Machine Operator, Bark Press Operator.
References
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics — https://www.bls.gov/oes/
- O*NET Online — https://www.onetonline.org/
- BLS Employment Projections — https://www.bls.gov/emp/
- O*NET-SOC code: 51-9041.00
TradeCollege.org provides higher-education, college and university, degree, program, career, salary, and other helpful information to students, faculty, institutions, and other internet audiences. Presented information and data are subject to change. Inclusion on this website does not imply or represent a direct relationship with the company, school, or brand. Information, though believed correct at time of publication, may not be correct, and no warranty is provided. Contact the schools to verify any information before relying on it. Financial aid may be available for those who qualify. TradeCollege.org is a for-profit site, and the displayed options may include sponsored or recommended results, not necessarily based on your preferences.
© TradeCollege.org – All Rights Reserved.